6 Inch DuraTech Stainless Factory Built Solid Pack Chimney Pipe
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots, with no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward and lengthwise, eliminating buckling and loss of structural integrity.
DuraTech uses twist-lock connections and is available with stainless or galvalume outer wall. The inner liner is 430-alloy stainless steel. Outer diameters are 2" larger than the inner.
Refractory insulation encased between two walls keeps the outer wall cool, while ensuring high flue gas temperatures for optimum draft performance. Please note: To calculate installed length of 5", 6", 7", or 8" DuraTech Chimney, subtract 1 1/4" from each joint overlap of chimney pipe. Allow a minimum of 2" air space to combustibles when installing DuraTech Chimney.
5" - 8" Diameters - Designed for appliances that are tested and listed for use with a 21000F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. Available in stainless steel (5"-8") or galvalume (6" and 8") outer casing and stainless steel inner wall with twist-lock connections.
-
2 inch clearance to combustibles.
-
Free-floating 430-alloy inner liner maintains structural
-
Limited Lifetime Warranty
-
UL Listed to 103HT
6" Straight
Pipe Outer diameters are 2" larger than the inner. Features inner wall of .020" 430 stainless steel. Outer wall of .016" 430 stainless steel. A Refractory insulation is encased between walls. Stainless steel end rings seal the pipe. Twist-Lock Fitting. MFG #6DT-06SS |
||||
|
12" Straight
Pipe Outer diameters are 2" larger than the inner. Features inner wall of .020" 430 stainless steel. Outer wall of .016" 430 stainless steel. A Refractory insulation is encased between walls. Stainless steel end rings seal the pipe. Twist-Lock Fitting. MFG #6DT-12SS |
||||
|
18" Straight
Pipe Outer diameters are 2" larger than the inner. Features inner wall of .020" 430 stainless steel. Outer wall of .016" 430 stainless steel. A Refractory insulation is encased between walls. Stainless steel end rings seal the pipe. Twist-Lock Fitting. MFG #6DT-18SS |
||||
|
24" Straight
Pipe Outer diameters are 2" larger than the inner. Features inner wall of .020" 430 stainless steel. Outer wall of .016" 430 stainless steel. A Refractory insulation is encased between walls. Stainless steel end rings seal the pipe. Twist-Lock Fitting. MFG #6DT-24SSCF |
||||
|
36" Straight
Pipe Outer diameters are 2" larger than the inner. Features inner wall of .020" 430 stainless steel. Outer wall of .016" 430 stainless steel. A Refractory insulation is encased between walls. Stainless steel end rings seal the pipe. Twist-Lock Fitting. MFG #6DT-36SSCF |
||||
|
48" Straight
Pipe Outer diameters are 2" larger than the inner. Features inner wall of .020" 430 stainless steel. Outer wall of .016" 430 stainless steel. A Refractory insulation is encased between walls. Stainless steel end rings seal the pipe. Twist-Lock Fitting. MFG #6DT-48SSCF |
||||
|
Adjustable Length Pipe 14" to 21" Use to add length to DuraTech chimney. Adjusts from 14-21. DuraTech Chimney pipe cannot be cut withouth destroying the pipe. Outer diameters are 2" larger than the inner. Features inner wall of .020" 430 stainless steel. Outer wall of .016" 430 stainless steel. A Refractory insulation is encased between walls. Stainless steel end rings seal the pipe. Twist-Lock Fitting. MFG #6DT-21TASS |
||||
|
6" Locking Band Use for extra security at pipe, elbow, and tee joints. Optional.. MFG #6DT-LB |
||||
|
Elbow Kit Elbow Kit includes: 2 Elbows and 1 Elbow Strap. Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Offsets greater than 30 degrees are not permitted in accordance to UL 103 standards. Elbows swivel 3600 at base (angles are not adjustable). A pair of elbows is required to return an offset chimney back to vertical. MFG #'s6DT-E15KSS, 6DT-E30KSS |
||||||||
|
Adjustable Elbow Strap Use to prevent excessive weight on the elbows by supporting the weight of the chimney. Required to be installed between two elbows in offset installations. Multiple elbow straps may be required for offset installations. Refer to installation instructions. MFG #6DT-AES |
||||
|
Square Ceiling Support Box Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twistlock. Suitable for both flat and cathedral (A-Frame) ceiling applications. Also use in short attic spaces (see instructions). Fits between standard 16" on-center joists and most manufactured home applications. Supports up to 60' of DuraTech Chimney. A 2" wide trim collar is included. Painted black. MFG #'s6DT-CS11, 6DT-CS24, 8DT-CS36 |
||||||||||||
|
Reduced Clearance Square Ceiling Support Box Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twistlock. Suitable for both flat and cathedral (A-Frame) ceiling applications. Also use in short attic spaces (see instructions). Fits between standard 12" on center joists and most manufactured home applications. Supports up to 60' of DuraTech Chimney. Use adapter to attach DVL or DuraBlack to the support box. A 2" wide trim collar is included. Painted black. MFG #6DT-CS24R |
||||
|
Round Ceiling Support Box Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. Supports up to 60' of DuraTech Chimney. Painted black. Trim collars are sold separately. MFG #6DT-RCS |
||||
|
Trim Collar for Round Support Box Conceals the gap between the Round Ceiling Support Box and the ceiling cutout. Painted black. MFG #5DT-TCR |
||||
|
Trim Collar for Roof Support Conceals gap between chimney pipe and ceiling cut out when used with Roof Support. Galvalume. Painted black. MFG #'s6DT-RSTC3, 6DT-RSTC6, 6DT-RSTC9, 6DT-RSTC12 |
||||||||||||||||
|
Flat Ceiling Support Box Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. Designed for installation in flat ceilings only. Supports up to 60' of DuraTech Chimney. Use adapter to attach DVL or DuraBlack to the support box. A 2" wide trim collar is included. Not painted, but can be painted with high temperature paint. MFG #6DT-FCS |
||||
|
Adjustable Roof Support Designed to support the DuraTech Chimney and allows the chimney to pass through the roof and extend down the ceiling. Ideal for cathedral ceilings and free-standing appliance installations. Supports a maximum total chimney length of 45' above and 20' chimney below Roof Support. Adjustable to different roof pitches. Adjusts between 8 to 10 inches. MFG #6DT-ARS |
||||
|
Slip Connector With Trim Used to adapt DuraBlack pipe to 6" - 8" Ceiling Support Box, including DuraTech, and DuraPlus. The Slip connector can also be added to 6" - 8" DuraTech finishing collar. Adds 3"-13" of length to rigid pipe. Provides a strong mechanical connection. MFG #6DBK-SC |
||||
|
Snap-Lock Adaptor With Trim Connects into the ceiling support box or finishing collar and extends down to fit into stovepipe for a drip-free connection to a DuraTech, DuraPlus, or DuraLiner Chimney system. Provides a strong mechanical connection. Adapter will work with all 6"-8" DuraPlus, and 7"-8" DuraTech installations. Adapter will work with 5"-6" DuraTech Ceiling Support Box installations only. MFG #6DBK-ADSL |
||||
|
Finishing Collar with Adapter New integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble. Provides proper connection to DVL or DuraBlack. No other adapter is needed. MFG #6DT-FC |
||||
|
Standard Tee With Cap Use for through-the-wall installations. Includes removable tee cap for easy chimney cleaning or inspection. Wall Straps, a Wall Thimble, and an Adjustable Tee Support Bracket must be installed with the Tee as directed. Available in stainless steel or with a galvalume outer wall and stainless steel inner wall. See installation instructions for proper location and installation of Tee. MFG #6DT-STSS |
||||
|
Adjustable Tee Support Bracket Use as wall support for chimney system. Use of straps is optional. Supports up to 50' of DuraTech Chimney without straps, and 70' of DuraTech Chimney with straps. Attaches to chimney pipe. Can be installed above or below the Tee. If installed below the Tee, a short section of pipe is required. Adjustable base provides 2" to 6" clearance to wall. MFG #6DT-TSBSS |
||||
|
Wall Thimble Adjusts from a minimum of 5 1/2" to a maximum of 9 1/2" wall thickness, and fits between standard wall studs. To accommodate thicker walls, the telescoping pieces can be extended up to 16" witha field-fabricated extension installed. Interior trim ring painted black. Must be installed with DuraTech chimney pipe horizontally through the wall and extend 6" into the room beyond the interior wall. MFG #6DT-WT |
||||
|
Attic Insulation Shield Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over Firestop Radiation Shield or a support box. Consists of two parts - a collar and a base. MFG #6DT-IS |
||||
|
Adjustable Extended Roof Bracket Extended roof bracket; provides additional support for the chimney when the chimney extends more than 5' beyond the roof; the legs will extend to handle varying roof slopes. New sandwich clamps allow legs to be extended to any length from 67" to 114". No drilling required. MFG #6DT-XRS |
||||
|
Firestop Radiation Shield Use in ceiling/floor penetrations when a ceiling support is not used. Not required when passing through the roof. Fits on underside of ceiling and adjusts to cover framing. MFG #6DT-FRS |
||||
|
Chimney Cap Required where pipe terminates above the roof line. Removable screws allow for cleaning of the chimney and spark arrestor screen. Made of stainless steel. See with optional Spark Arrestor screen below. MFG #6DT-VC |
||||
|
Spark Arrestor Use on inside of cap. Optional Spark Arrestor may be required. MFG #5DT-SA |
||||
|
Snow Splitter Three times thicker and stronger, allowing it to stand up against heavier snow loads. Bendable attachment flanges allow it to mount on any roof slope. Use to divert snow around chimney, vent and roof flashing. Constructed of paintable galvanized material. Ships flat for easy assembly. Works with 6", 7", 8", and 10". MFG #6DT-SP |
||||
|
Storm Collar Required with DuraTech flashing to create a weather-proof penetration through the roof deck. Seal inner edge of the collar to the chimney pipe with non-hardening 5000 F high-temperature sealant. Made of aluminum. MFG #5DT-SC |
||||
|
Anchor Plate Use to attach DuraTech Chimney to an appliance or masonry fireplace. Check with appliance manufacturer to ensure DuraTech Chimney is approved for use. MFG #6DT-AP |
||||
|
Transition Anchor Plate Use when converting from DuraLiner to DuraTech in chimney restoration. Use with a DuraLiner Slip Connector and Hanger. MFG #6DT-AP17x17 |
||||
|
Wall Strap Use in interior or exterior installations to add lateral support to the chimney. Assures a 2" to 6" clearance to combustible walls. Required every 8 feet. MFG #6DT-WSSS |
||||
|
Adjustable Wall Strap Stabilizes chimney while ensuring a minimum 2 inch clearance to combustibles. Can adjust out to 6 inch clearance if needed. One part covers 2 diameters (6 & 8 inch). MFG #6DT-AWS-SS |
||||
|
Adjustable Extended Wall Support Supports up to 20 feet of chimney. Tee Support is not necessary when using this support. For 6 inch diameter, it adjusts from 8 to 15 inches. MFG #6DT-XWS |
||||
|
Adjustable Roof Flashing Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6" over a horizontal distance of 12". Made of galvalume. MFG #'s6DT-F6, 6DT-F12 |
||||||||
|
DSA Roof Flashing Use with metal or tile roofs. Made of dead soft aluminum. MFG #'s 6DT-F6DSA, 6DT-F12DSA |
||||
|
Flat Roof Flashing Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6" over a horizontal distance of 12". Made of galvalume. MFG #6DT-FF |
||||
|
Selkirk Ultra-Temp Malleable Dead Soft Aluminum Flashing Made of Aluminum base and designed to be molded to uneven roof surfaces. This Flashing is used to seal the opening where the chimney penetrates the roof to divert rain and snow down from the roof and away from the chimney system. MFG #206845 |
||||
|
DVL/DuraBlack Chimney Adapter with Trim Use to connect from double-wall DVL and/or single-wall DuraBlack to DuraTech, DuraPlus, and DuraLiner for a throughthe-wall or ceiling support installation. Required for proper connection. Made of stainless steel. MFG #6DVL-ADC |
||||
|
DVL Adapter Use to connect from double-wall DVL to DuraTech, DuraPlus, and DuraLiner for a through-the-wall or ceiling support installation. Required for proper connection. Provides a strong mechanical connection. Painted black. Adapter will work with all 6"-8" DuraPlus, and 7"-8" DuraTech installations. Adapter will work with 5"-6" DuraTech Ceiling Support Box installations only. MFG #6DVL-ADT |
||||
|
Frequently Asked Questions About Stove Pipe |
A Few Words To The Wise |
1. Stick with one brand of stovepipe for connecting woodstoves to chimney.
This ensures the most secure stovepipe connection. Learn
why a good stovepipe connection is so important. |
M&G DuraVent provides no warranty for the following professional products if such products are not installed by a trained professional installer: DuraTech®, DuraPlus HTC®, DuraChimney® II, PelletVent Pro®, DirectVent Pro®, FasNSeal®, FasNSeal® W2, FasNSeal® Flex, and PolyPro®, and M&G DuraVent’s relining products including DuraLiner®, DuraFlex® (SW, Pro, 316, 304), and Ventinox®.
• Any M&G DuraVent product sold by a non-approved website will not be warranted.
• Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent.
• Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent’s trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy.