Selkirk 6 Inch Chimney Pipe Ultra Temp
We cannot ship any of the items on this page to Alaska, Hawaii, Puerto Rico or Canada.
Selkirk Chimney Pipe Ultra Temp stands out as the top choice for both small residential and large custom chimney projects, thanks to its stainless steel inner liner and outer jacket. Its Twist-Lock coupling system ensures quick and easy installation, while the slim design lock band conceals and protects seams for added durability. This pipe requires 2" clearance to combustible materials.
This All-Fuel Chimney Pipe meets the Underwriters Laboratories Safety Standard for Factory-Built Chimneys (UL-103).
Featuring proprietary Solid Pack Insulation, Ultra-Temp Chimney maintains higher flue gas temperatures for optimal draft performance and lower external temperatures for increased safety. Independent tests by Omni Labs confirm that the Ultra-Temp Chimney remains the coolest even under the most intense conditions.
- All residential fuels
- Stainless Steel inner and outer
- Twist-Lock for secure connection
- Multiple Support Kits available
- 304 Stainless Steel Inner Liner
- 430 Stainless Steel Outer Wall
- 1" Solid Pack Mineral Wool Insulation
6" Straight
Pipe
Secure twist-lock design couples chimney sections together with just a 1/8 turn. Furnished with a Locking Band. Requires 2" clearance to combustible material. To calculate installed length, subtract 1-1/4" per joint. |
|
|
12" Straight
Pipe
Secure twist-lock design couples chimney sections together with just a 1/8 turn. Furnished with a Locking Band. Requires 2" clearance to combustible material. To calculate installed length, subtract 1-1/4" per joint. |
|
|
24" Straight
Pipe
Secure twist-lock design couples chimney sections together with just a 1/8 turn. Furnished with a Locking Band. Requires 2" clearance to combustible material. To calculate installed length, subtract 1-1/4" per joint. |
|
6" x 24" |
C8046419 |
$139.79 |
|
|
36" Straight
Pipe
Secure twist-lock design couples chimney sections together with just a 1/8 turn. Furnished with a Locking Band. Requires 2" clearance to combustible material. To calculate installed length, subtract 1-1/4" per joint. |
|
6" x 36" |
C1954759 |
$182.79 |
|
|
48" Straight
Pipe
Secure twist-lock design couples chimney sections together with just a 1/8 turn. Furnished with a Locking Band. Requires 2" clearance to combustible material. To calculate installed length, subtract 1-1/4" per joint. |
|
6" x 48" |
C0099861 |
$219.99 |
|
|
15 Degree Insulated Elbow Kit
Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Greater angles are prohibited by UL standard 103 and by the terms of the product listing. Required locking bands (2 packaged with each elbow kit) allow 360 deg rotation and lock the components together in place at the exact offset required. Insulated elbows can be used at the same 2 inch air space clearance as chimney sections. The first vertical length of chimney above an offset should be resupported, using an Interior Resupport Assembly securely clamped to the pipe just below a Locking Band, with its straps nailed to a nearby structure. Includes 2 elbows, 2 locking bands and interior resupport. |
|
|
30 Degree Insulated Elbow Kit
Can be used for fixed offsets of 30 deg slope. Greater angles are prohibited by UL Standard 103 and by the terms of the product listing. Required Locking bands (2 packaged with each elbow kit) are to be used at each joint. Each offset must be resupported. Elbows rotate 360 deg to provide the exact orientation required. Insulated elbows can be used at the same 2 inch air space clearance as chimney sections. Kit includes 2 elbows, 2 locking bands and one interior resupport. |
|
|
Insulated Chimney Tee With Cap
Allows the horizontal connection of the chimney to the appliance. Can be used on the interior or exterior of the building, in combination with a Wall Support Assembly. The Tee Cap provided allows access for inspection and cleaning. Includes Locking Band. |
|
|
Locking Band (Pack of Four)
Versatile, simple device for increasing stability of a chimney. Inward flanges around the band fit into grooves at chimney length joints. Reinforces joints of chimney and prevents accidental uncoupling. Locking Band is included with all insulated lengths, tees and elbow kits. Made of stainless steel. |
|
|
Finishing Collar
The Finishing Collar fits over lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee. Black Matte Finish. |
|
|
Storm Collar
Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with nonhardening silicone caulking to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning. |
|
|
Wall Band
The Wall Band is used along the wall to provide for 2 inch clearance and assure stability. Required at 8 foot or closer intervals above the tee to stabilize the chimney. Stainless steel construction. |
|
|
Anchor Plate
The Anchor Plate provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. The Anchor Plate can be used for adapting the UT Chimney to a "Listed" Factory-Built fireplace certified for use with model UT. Follow the installation instructions accompanying the fireplace. Stainless steel and heavy gauge steel construction for long life. Retains chimney with a twist-lock connection. |
|
|
Attic Insulation Shield
The Attic Insulation Shield is used wherever the chimney enters an open attic. A drop-down Joist Shield is included for use when the chimney is enclosed below the ceiling. Refer to instructions for full details.The Attic Insulation Shield acts as an insulation shield to keep blown in or blanket insulation from filling in any framed opening or contacting the chimney and possible storage of combustibles against the chimney. |
|
|
Dripless Stove Pipe Adapter New Installation
Dripless Stove Pipe Adapters are used to connect single wall stove pipe to Ultra-Temp or Galva-Temp Systems. Dripless Stove Pipe Adapters are designed to slip inside single wall stove pipe to contain any creosote dripping down the chimney to inside the stove pipe. This adapter is for use in new installations, this part can be installed by twist-locking the coupler on the DSAC into the first section of Ultra-Temp or Galva-Temp Type HT chimney pipe. Made of 430 Stainless Steel. |
|
|
Dripless Stove Pipe Adapter Retrofit Installation
Dripless Stove Pipe Adapters are used to connect single wall stove pipe to Ultra-Temp or Galva-Temp Systems. Dripless Stove Pipe Adapters are designed to slip inside single wall stove pipe to contain any creosote dripping down the chimney to inside the stove pipe. This adapter is for use use in retrofit installations, this part can be installed from below a Finish Support Package or Support Box and secured with screws. Made of 304 Stainless Steel. |
|
|
Firestop Joist Shield
Prevents or delays the rapid spread of fire (regardless of the cause) in a home or building. The sheet metal firestop prevents the chimney passageway from becoming an easy pathway for fire to spread from one floor to another. Used in floor/ceiling penetrations other than those which include a ceiling support. Not required when passing through roof. |
|
|
Insulated Wall Thimble
The Insulated Wall Thimble installs quickly and eliminates the need for using individual firestops. The round shielding acts as a radiation shield and provides the required 2" (air space) clearance to combustibles. The two sections telescope to accommodate 6" to 11" wall thickness. Interior wall plate painted black. |
|
|
Round Ceiling Support
With proper framing, all ceiling supports assure at least 2" minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height. Please note: This is the round ceiling support. We also offer the square ceiling support. |
|
|
Square Ceiling Support
With proper framing, all ceiling supports assure at least 2" minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height. Please note: This is the square ceiling support. We also offer the round ceiling support. |
|
|
Round Top
Part of the chimney system roof assembly, the round top is designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. Designed with three legs that slide down over the outside of the chimney. A cinch band is then positioned over the legs and tightened to hold the top firmly in place. This design makes cap removal for cleaning a breeze. |
|
|
Spark Arrestor
Preformed for easier installation. Fits same size round chimney top. Keeps foreign objects out of chimney. Diamond shaped 1/2 inch x 1 inch mesh, 18-8 stainless steel. |
|
|
Adjustable Pitched Ceiling Plate
Provides a finished appearance where the chimney passes through a sloped ceiling. Matte black finish. Adjusts to multiple roof pitches. Covers 2" air space around chimney for attractive finish. For 2/12 - 6/12 Pitch Roofs. To determine your roof pitch, measure the number of inches from the end of a level ruler down to the roof. This is the rise for 12 in of run. A rise of 5 in is a 5/12 pitch. 4 in, a 4/12 pitch and more. |
|
|
Adjustable Flashing 2/12 To 6/12 Pitch
Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow down from the roof and away from the chimney system. This adjustable flashing works with 2/12 To 6/12 Pitch roofs. To determine your roof pitch, measure the number of inches from the end of a level ruler down to the roof. This is the rise for 12 in of run. A rise of 5 in is a 5/12 pitch. 4 in, a 4/12 pitch and more. |
|
|
Adjustable Flashing 6/12 To 12/12 Pitch
Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow down from the roof and away from the chimney system. This adjustable flashing works with 6/12 To 12/12 Pitch Pitch roofs. To determine your roof pitch, measure the number of inches from the end of a level ruler down to the roof. This is the rise for 12 in of run. A rise of 5 in is a 5/12 pitch. 4 in, a 4/12 pitch and more. |
|
|
Universal Rubber Boot Flashing Kit
Flashing is used to seal the opening where the chimney penetrates the roof to divert rain and snow down from the roof and away from the chimney system. Used for installations on corrugated roofs flat to 12/12 pitch. Kit includes rubber boot (23-4/5" x 21-1/2"), spacers kit, special storm collar, shield, and mounting screws. To determine your roof pitch, measure the number of inches from the end of a level 12" ruler down to the roof. This is the rise for 12 inches of run. A rise of 5 inches is a 5/12 pitch. . .4 inches, a 4/12 pitch, etc. |
|
|
Flat Ceiling Support Kit
Provides the support package and termination parts for a chimney that is supported by a flat ceiling and passes through an attic area and penetrates a 2/12 to 6/12 pitch roof. Just add pipe lengths and the Flat Ceiling Support Kit has all necessary parts for complete installation. However, depending upon your roof design and the position of your chimney on the roof, it may be necessary to install a roof brace kit to provide required support for your chimney above the roof. Kit includes Round Top, Attic Insulation Shield, Storm Collar, Finish Support Package, Adjustable Flashing, Smoke Pipe Adapter. |
|
|
Pitched Ceiling Support Kit
For installation of a chimney in a cathedral or pitched ceiling such as standard A-Frame construction. The Pitched Ceiling Support Kit provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and adjustable flashing. Selection of the Adjustable Flashing is determined by the pitch of your roof. Depending on the height of pipe above the roof, a Roof Brace Kit may be required. Kit includes Round Top, Storm Collar, Finishing Collar, Roof Support Package, Adjustable Pitched Ceiling Plate, Smoke Pipe Adapter. |
|
|
Thru-The-Wall Support Kit
For a wall-supported chimney system with a horizontal connector passing through an exterior wall, connecting to a Tee and running verticaly up the exterior wall to termination above the roof line. The thru-the-wall support kit provides all necessary parts for a complete installation with the exception of required insulated pipe lengths to reach your desired chimney height. One Wall Band is included in the kit. Additional Wall Bands could be required if your vertical chimney run is more than 16 feet high. In the event that your vertical chimney run penetrates the roof eave, your installation could also require an Adjustable Flashing and Storm Collar. Depending on the height of pipe above the roof, a Roof Brace Kit may be required. Kit includes Round Top, 12 Inch Insulated Pipe Length, Wall Band, Insulated Tee/Plug, Finshing Collar, Wall Support Kit, Chimney Pipe Adapter, Insulated Wall Thimble. |
|
|
Wall Support Kit
The Type HT wall support kit has been tested for use fully enclosed and has been designed in various chimney pipe sizes to carry up to 60 ft of height at 2 inches from the wall. The wall support is intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. It is also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may be fastened to the wall either above or below the plate for chimneys which penetrate through the wall. |
|
|
Roof Brace Kit
Used whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load and to prevent damage from static and sliding snow. It should be used, at a midpoint on the chimney. Bracket adjusts from 4 to 7 1/2 feet. |
|
|
Roof Support Package
An ideal support assembly for open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily on to top of roof through opening that allows 2" clearance. Maximum length of chimney which can be suspended below is 20' supported. Maximum total length is 30'. The Roof Support Package contains one 18" length of pipe, roof brackets and necessary hardware. The brackets may be assembled to any standard pipe length at any desired height. Locking bands must be used at each pipe joint. |
|
|
Click the image for a pdf on typical Selkirk 6 Inch Chimney Pipe Ultra Temp Installations
1. Stick with one brand and type of chimney pipe. This ensures the most secure
connection and is very important for a safe installation.
2. New chimney pipe installations may smoke a little and
emit an odor when first used. This is normal curing. Allow ventilation of an open a window or door to allow
the smoke and fumes to escape during the beginning of your first fire.
Never use chimney pipe as a chimney or pass it through an unprotected wall.
Return to top of page |
